Tiki Permission Check (TPC): An additional source of information if Tiki install fails.
Since Oct. 2012, standalone (attached below to this page), and included also as a feature in Tiki10.
If Tiki installer and tiki-check.php fail, Tiki Permission Check can be used to figure out some details about filesystem permissions needed by the webserver to make those ones work. Permissions for Tiki Permission Check can be fixed manually (only a few files via FTP or SSH or other shell access) or by an included script. Then Tiki Permission Check can be used to figure out which filesystem permissions are needed to run Tiki on the webserver. This permission setting needn't be unique, so you may choose more or less restrictions depending on the security level you want and/or need.
Tiki Permission Check can be used to figure out file permission problems independent from Tiki itself. In those cases file permissions have to be adjusted manually or by whatsoever method appropriate to that alien project.
A convenient way to use the information for installing Tiki is by setup.sh modification (upcoming soon).
Due to several webserver settings und use cases TPC offers several predefined models to check whether an installation will work with them or not. Once the correct model(s) is (are) known, they can be used to run the setup script sh setup.sh foo with the appropriate command. Builtin permission models (Effective 2012-11-11):
Without shell access the permissions need to be set by FTP or another method. This may be a lot of work, since some files and subdirs need to be writable, but those wo needn't be writable shouldn't be given write permission. Hopefully those installations (e.g. shared hosting) use SuPHP webserver protection, which makes it easier to set permissions to a useful level (even if not theoretical optimum).
Tiki Permission Check is available in trunk and as standalone download. It will be available in Tiki10 (Effective 2012-10-22). Standalone version will (at least: should) work with any version of Tiki. At the bottom of this page there is an alpha version attached.
Bleeding edge code is at:
An important issue is to enable and disable Tiki Permission Check. Once you've got the information you need it is strongly recommended to disable it, because some subdirectories are set world writable for testing purposes and ownership (user/group) of files is exposed to the public (but you may use htaccess protection if possible, this depends on webserver's settings).
Use a shell like sh (or bash, dash) to run the script prepare_permissioncheck.sh in Tiki's document root.
In Tiki's document root:
chmod 600 prepare_permissioncheck.sh
If you need htaccess protection, copy permissioncheck/_htaccess to permissioncheck/.htaccess.
In Tiki's document root:
chmod 644 permissioncheck/.htaccess
If .htaccess exists but is not readable by webserver, problems may occur.
This is done each time Tiki Permission Check is enabled or disabled by shell script. So in most cases you needn't do this manually.
You cannot use htaccess password protection when TPC is enabled, because TPC uses http requests to figure out the possible models. You need htaccess password protection only if you are beyond paranoia. In this case, you may delete the complete folder permissioncheck/ once Tiki is installed and runs. This deletion is without impact to Tiki. The shipped .htpasswd contains pre-encoded user foo with password bar.
In Tiki's document root:
sh prepare_permissioncheck.sh enable
In Tiki's document root:
sh prepare_permissioncheck.sh disable
Setting permissions without shell access is kind of annoying. You may set local file permissions and upload them or you set file permissions via FTP (in both cases: enable/disable). In addition, you need to copy permissioncheck/yes.bin to permissioncheck/permission_granted.bin to enable and copy permissioncheck/no.bin to permissioncheck/permission_granted.bin to disable Tiki Permission Check (in both cases: then FTP upload permissioncheck/permission_granted.bin).
chmod 755 permissioncheck
chmod 644 permissioncheck/check.php
chmod 644 permissioncheck/functions.php.inc
chmod 600 permissioncheck/_htaccess
chmod 644 permissioncheck/.htaccess if it exists
chmod 600 permissioncheck/_htpasswd
chmod 600 permissioncheck/.htpasswd
chmod 644 permissioncheck/index.php
chmod 444 permissioncheck/no.bin
chmod 444 permissioncheck/permission_print.php.inc
chmod 644 permissioncheck/permission_granted.bin
chmod 644 permissioncheck/permission_granted.php.inc
chmod 644 permissioncheck/usecases.php.inc
chmod 644 permissioncheck/usecases.bin
chmod 644 permissioncheck/usecases.txt (will become obsolete)
chmod 444 permissioncheck/yes.bin
Set htaccess Permissions
If Tiki Permission Check is protected by an existing .htaccess in permissioncheck/, in Tiki's document root:
chmod 644 permissioncheck/.htaccess
If .htaccess exists but is not readable by webserver, problems may occur. You don't really need .htaccess and Tiki Permission Check does not work properly with password protection when it is enabled.
create permissioncheck/new_htaccess (with arbitrary content), copy permissioncheck/yes.bin to permissioncheck/permission_granted.bin and upload both, change file permissions at FTP server as follows:
chmod 644 permissioncheck/create_new_htaccess.php
chmod 777 permissioncheck/insane
chmod 777 permissioncheck/insane/check.php
chmod 700 permissioncheck/mixed
chmod 660 permissioncheck/mixed/check.php
chmod 705 permissioncheck/morepain
chmod 606 permissioncheck/morepain/check.php
chmod 705 permissioncheck/moreworry
chmod 604 permissioncheck/moreworry/check.php
chmod 666 permissioncheck/new_htaccess
chmod 701 permissioncheck/pain
chmod 606 permissioncheck/pain/check.php
chmod 770 permissioncheck/paranoia
chmod 600 permissioncheck/paranoia/check.php
chmod 701 permissioncheck/paranoia-suphp
chmod 600 permissioncheck/paranoia-suphp/check.php
chmod 775 permissioncheck/risky
chmod 664 permissioncheck/risky/check.php
chmod 500 permissioncheck/sbox
chmod 600 permissioncheck/sbox/check.php
chmod 701 permissioncheck/worry
chmod 604 permissioncheck/worry/check.php
copy permissioncheck/no.bin to permissioncheck/permission_granted.bin and upload, change file permissions at FTP server as follows:
chmod 000 permissioncheck/create_new_htaccess.php
chmod 700 permissioncheck/insane
chmod 600 permissioncheck/insane/check.php
chmod 700 permissioncheck/mixed
chmod 600 permissioncheck/mixed/check.php
chmod 700 permissioncheck/morepain
chmod 600 permissioncheck/morepain/check.php
chmod 700 permissioncheck/moreworry
chmod 600 permissioncheck/moreworry/check.php
chmod 600 permissioncheck/new_htaccess
chmod 700 permissioncheck/pain
chmod 600 permissioncheck/pain/check.php
chmod 700 permissioncheck/paranoia
chmod 600 permissioncheck/paranoia/check.php
chmod 700 permissioncheck/paranoia-suphp
chmod 600 permissioncheck/paranoia-suphp/check.php
chmod 700 permissioncheck/risky
chmod 600 permissioncheck/risky/check.php
chmod 700 permissioncheck/sbox
chmod 600 permissioncheck/sbox/check.php
chmod 700 permissioncheck/worry
chmod 600 permissioncheck/worry/check.php
http://example.org/permissioncheck/
http://demo.tiki.org/pd/permissioncheck/
http://demo.tiki.org/10x/permissioncheck/
http://demo.tiki.org/trunk/permissioncheck/
Visit your own Tiki installation's path /permissioncheck/ and you will see the TPC main page. You can replace the domain example.com with your own domain in the example above. When the page tells you it's disabled, you need to enable it. You should see all permission models, user, group and file permissions for those models and a hint whether this model works or not. Note the model names which seem to work, you'll need them.
Go to your Tiki root directory and run the setup script with one of the model names which seem to work:
sh setup.sh $model
where you replace $model with the name you noted before. If this model still does not work, try another one. If no model works, try all predefined models one by one and see what happens.
Warning: not recommended for beginners
Arbitrary use cases can be added, this is quickly and easily done by three steps:
1) Define a use case's name, add a directory with this name in subdir permissioncheck/ and copy permissioncheck/check.php into the new use case subdir.
2) Define octal subdir read (default) permission, octal file read (default) permission, octal subdir write permission and octal file write permission. Add name and permissions to permissioncheck/usecases.bin seperated by colon. Be careful with line endings, Apple (CR) and Windows (CR+LF) are not tested yet.
3) Add the use case to setup.sh in Tiki's main directory. At the end of the script in main program: copy the line php) permission_via_php_check ;; and replace (in the new line only) the beginning php) with name), where name is the one you've got chosen at 1) before.
| ID | Name | Comment | Uploaded | Size | Downloads | |
|---|---|---|---|---|---|---|
| 66 | permissioncheck-20121105-2019-standalone.zip | alpha version of standalone permissioncheck 20121105 | Frank Guthausen | 55.93 Kb | 655 | |
| 64 | permissioncheck-20121025-1930-standalone.zip | alpha version of standalone permissioncheck 20121025 | Frank Guthausen | 14.80 Kb | 474 |